MagiCAD Sprinkler Designer provides powerful, fully integrated specialised sprinkler calculations to a wide range of globally renowned sprinkler standards. The package combines both a piping module and a sprinkler calculation module for Revit and AutoCAD.
The MagiCAD Sprinkler Calculation module enables sprinkler pipe sizing and flow calculations to completed and ensure that designing and modelling sprinkler systems is fast, easy and efficient to configure. The MagiCAD Piping module enables sprinkler heads and components to be accurately placed and then automatically connected to distribution pipework.
MagiCAD Sprinkler Designer also includes the MagiCAD Common Tools. These are a broad range of smart productivity and collaboration functions.
Below is a short summary of some of the tools and functions that MagiCAD Sprinkler Designer offers. Please Contact us here to learn more about this module in further detail.
Key Features
Supported Sprinkler Standards
The MagiCAD Sprinkler Calculation tool supports a wide range of fully ...
The MagiCAD Sprinkler Calculation tool supports a wide range of fully integrated sprinkler calculation standards. All calculations are performed within the Autodesk Revit software environment. Any of the following standards can be selected:
NFPA 13
BS 9251:2014
EN 12845
CEA 4001
UNI 10779
AS 2018
MS 1910:2006
CP 52:2004
Calculation Reports
Calculation reports of all calculation results are available both on s...
Calculation reports of all calculation results are available both on screen and as printable reports. Together with the node numbering tool, it is possible to match calculation data reports with printed drawings. The report integrates the following parameters and information: average density for the 4 weakest sprinkler heads with the heads automatically identified, actual flow density for each sprinkler head, required system pressure based on the hydraulically most remote area, calculations in systems with fire hydrants connected directly to the sprinkler network, the operating point on the pump curve, the theoretical operating point on the system curve, and the identification of the weakest sprinkler head.
You can also adjust sprinkler pipe sizes directly in the sprinkler network calculation report and then recalculate with the new pipe sizes.
MagiCAD Sprinkler Designer provides powerful, fully integrated specialised sprinkler calculations to a wide range of globally renowned sprinkler standards. The package combines both a piping module and a sprinkler calculation module for Revit and AutoCAD.
The MagiCAD Sprinkler Calculation module enables sprinkler pipe sizing and flow calculations to completed and ensure that designing and modelling sprinkler systems is fast, easy and efficient to configure. The MagiCAD Piping module enables sprinkler heads and components to be accurately placed and then automatically connected to distribution pipework.
MagiCAD Sprinkler Designer also includes the MagiCAD Common Tools. These are a broad range of smart productivity and collaboration functions.
Below is a short summary of some of the tools and functions that MagiCAD Sprinkler Designer offers. Please Contact us here to learn more about this module in further detail.
Key Features
Supported Standards
The MagiCAD Sprinkler Calculation tool supports a wide range of fully ...
The MagiCAD Sprinkler Calculation tool supports a wide range of fully integrated sprinkler calculation standards. All calculations are performed within the Autodesk AutoCAD software environment. Any of the following standards can be selected:
NFPA 13
BS 9251:2014
EN 12845
CEA 4001
Calculation Reports
Calculation reports of all calculation results are available both on s...
Calculation reports of all calculation results are available both on screen and as printable reports. Together with the node numbering tool it is possible to match calculation data reports with printed drawings. The report integrates the following parameters and information: average density for the 4 weakest sprinkler heads with the heads automatically identified, actual flow density for each sprinkler head, required system pressure based on the hydraulically most remote area, calculations in systems with fire hydrants connected directly to the sprinkler network, the operating point on the pump curve, the theoretical operating point on the system curve, and the identification of the weakest sprinkler head.
You can also adjust sprinkler pipe sizes directly in the sprinkler network calculation report and then recalculate with the new pipe sizes.
What you need to know
There are many options to choose from when selecting MagiCAD software for MEP. The following information provides a simple guide for making your choice easy:
Choose the Autodesk platform where you will run MagiCAD
MagiCAD for Revit fully integrates and functions seamlessly within the Autodesk Revit and Building Design Suite platforms and runs on Windows OS.
MagiCAD for AutoCAD fully integrates and functions seamlessly within the Autodesk AutoCAD, AutoCAD Architecture, or AutoCAD MEP platforms and runs on Windows OS.
MagiCAD Suite is an optimal choice if you run projects on both Autodesk Revit and AutoCAD platforms.
Choose the MEP discipline or disciplines you will focus on
MagiCAD offers several discipline-specific modules for you to choose from. MagiCAD’s BIM object libraries and Common Tools are inclusive within each module.
MagiCAD Ventilation – available for Revit and AutoCAD platforms
MagiCAD Piping – available for Revit and AutoCAD platforms
MagiCAD Electrical – available for Revit and AutoCAD platforms
MagiCAD Schematics – available for Revit and AutoCAD platforms
MagiCAD Sprinkler Designer– sold as a bundle with MagiCAD Piping, available for Revit and AutoCAD platforms
MagiCAD Supports & Hangers – available for the Revit platform
MagiCAD Circuit Designer – available for the AutoCAD platform
MagiCAD Comfort & Energy – available for the AutoCAD platform
MagiCAD Room – available for the AutoCAD platform
Choose the license type that best suits your needs
Perpetual Licenses
Stand-alone Licence Model (SLM): This type of licence is node-locked and is tied to a particular PC workstation. These licences are ideal for individuals or small office environments requiring only a few personnel to access and use the software.
Network Licence Model (NLM): This type of licence is not tied to a particular PC workstation and therefore it offers a more flexible option than SLM. Each network license entitles one user of the software product at a time. Network licences are ideal for larger organisations that require many individuals to access and use the software.
Maintenance for Perpetual Licenses offers licensing with access to the latest software main release and software update releases.
Subscription Licenses
Subscription offers fixed-term based licensing. Both SLM and NLM licencing models are available. Access to the latest software main release and software update releases are included. Fixed-term subscriptions are available as shorter 3 and 6-month contracts as well as longer 12, 24 and 36-month contracts. Subscription licenses are available for MagiCAD Ventilation, MagiCAD Piping, MagiCAD Electrical, MagiCAD Schematics and MagiCAD Supports & Hangers.
Educational licenses
These licences are only for educational purposes and are available for universities, colleges and institutes. Educational licences contain a range of MagiCAD modules with full functionality. The license term is fixed to 12 months at a time.
Onboarding
New MagiCAD software can be sold with an additional paid training package. MagiCAD Group and our partners arrange software training for both new and existing customers. Dependent on the platform and the combination of modules to be trained, a tailored training package is assembled and delivered.
Contact our sales for further information
and to receive a quotation
